Micro-computerized injective oil lubricator SSII-62Micro-computerized injective oil lubricator SSII-62http://www.shengsong.com.tw/en/product_1298289.html1. Power cord (O1): black color and white color are for AC220V. And green color is for 24V, no oil stop switch.2. Automatically stops within a few seconds, from 1 to 120 seconds. And, starts to operate after a delay of 0 seconds.3. The oil injection time is from 0.5 seconds to 30 seconds. And the stop time is between 1 and 60 minutes.4. This oil filling machine has 6 ports for oil output simultaneously. Set up is simple and operation is convenient.5. Next to the pressure gauge, there is a pressure adjustment mechanism. Adjust it clockwisely from 2 to 3Kg.1298289
51
1. Power cord (O1): black color and white color are for AC220V. And green color is for 24V, no oil stop switch.2. Automatically stops within a few seconds, from 1 to 120 seconds. And, starts to operate after a delay of 0 seconds.3. The oil injection time is from 0.5 seconds to 30 seconds. And the stop time is between 1 and 60 minutes.4. This oil filling machine has 6 ports for oil output simultaneously. Set up is simple and operation is convenient.5. Next to the pressure gauge, there is a pressure adjustment mechanism. Adjust it clockwisely from 2 to 3Kg.
Electronic fuel injection machine SSII-53Electronic fuel injection machine SSII-53http://www.shengsong.com.tw/en/product_1298294.html1. Power cord (O1): black color and white color are for AC220V, green color is for 24V, no oil. Startup power cord (two-wire set) (O2) 12V-24V is the delayed power supply. Proximity switch sensor line (one set) (O3)2. The number of seconds can be adjusted freely from 1 to 240 seconds. To set up the oil injection time, first, set at 0 degrees, and then set at 180 degrees for oil injection diagonally. Then, set at 10 degrees, and, again set at 190 degrees and so on. The panel calculates automatically. Each injection point is different, so that every position will be lubricated.3. Press "Direct oil Injection" and set/execute (O4), all actions will be restarted from 0 degrees. The oil injection time is from 0.5 seconds to 30 seconds. And the stop time is between 0 and 60 minutes. It can be adjusted in according to requirement.4. During normal operation, the number displayed on the panel indicates RPM. This panel displays the number of machine RPM settings.5. A, B, C, D lights (O5) represent the oil injection port positions. A is set for No. 1 to No. 3 oil injection ports. B is set for No. 4 to No. 6 oil injection ports. And C and D are reserved ports.6. When "Err" appears on the panel, the proximity switch sensor is damaged and the machine stops automatically. Simple troubleshooting: first unplug the green wire 24V to stop normal operation of the machine. At this time, the diagonal oil injection function stops. Because the no oil indicator has been removed, please pay attention to determine that the oil reserve is sufficient. Because that the proximity switch sensor will be replaced immediately, for the oil injection machine to function normally and smoothly.7. The no oil warning light (O6) means that the no oil warning light is on and stops automatically. When the oil is full, the no oil light turns off and starts to operate after start up.1298294
51
1. Power cord (O1): black color and white color are for AC220V, green color is for 24V, no oil. Startup power cord (two-wire set) (O2) 12V-24V is the delayed power supply. Proximity switch sensor line (one set) (O3)2. The number of seconds can be adjusted freely from 1 to 240 seconds. To set up the oil injection time, first, set at 0 degrees, and then set at 180 degrees for oil injection diagonally. Then, set at 10 degrees, and, again set at 190 degrees and so on. The panel calculates automatically. Each injection point is different, so that every position will be lubricated.3. Press "Direct oil Injection" and set/execute (O4), all actions will be restarted from 0 degrees. The oil injection time is from 0.5 seconds to 30 seconds. And the stop time is between 0 and 60 minutes. It can be adjusted in according to requirement.4. During normal operation, the number displayed on the panel indicates RPM. This panel displays the number of machine RPM settings.5. A, B, C, D lights (O5) represent the oil injection port positions. A is set for No. 1 to No. 3 oil injection ports. B is set for No. 4 to No. 6 oil injection ports. And C and D are reserved ports.6. When "Err" appears on the panel, the proximity switch sensor is damaged and the machine stops automatically. Simple troubleshooting: first unplug the green wire 24V to stop normal operation of the machine. At this time, the diagonal oil injection function stops. Because the no oil indicator has been removed, please pay attention to determine that the oil reserve is sufficient. Because that the proximity switch sensor will be replaced immediately, for the oil injection machine to function normally and smoothly.7. The no oil warning light (O6) means that the no oil warning light is on and stops automatically. When the oil is full, the no oil light turns off and starts to operate after start up.
Electronic fuel injection machine SSII-52Electronic fuel injection machine SSII-52http://www.shengsong.com.tw/en/product_1298295.html1. Power cord (O1): black color and white color are for AC220V，and green color is for 24V, connected to no oil stopping switch.2. Adjust automatically for several seconds, from 1 to 120 seconds. The no oil warning light (O2) represents that the no oil warning light is on and stops automatically. This light will be turned off automatically when oil is full, and after start up, this action will be delayed for 0.1 seconds.3. SET/RUN setting and start key (O3), press once to set, and press twice to start.4. The A, B, C, and D lights represent the positions of oil injection ports (O4)，A is set for No. 1 to No. 3 oil injection ports, B is set for No. 4 to No. 6 oil injection ports, and C and D are reserved ports.5. Set all the oil injection ports to work at the same time. Press SET/RUN and then press the circulation setting. Wait until A, B, C, and D lights are all on, and then set the number of seconds needed for adjustment.1298295
51
1. Power cord (O1): black color and white color are for AC220V，and green color is for 24V, connected to no oil stopping switch.2. Adjust automatically for several seconds, from 1 to 120 seconds. The no oil warning light (O2) represents that the no oil warning light is on and stops automatically. This light will be turned off automatically when oil is full, and after start up, this action will be delayed for 0.1 seconds.3. SET/RUN setting and start key (O3), press once to set, and press twice to start.4. The A, B, C, and D lights represent the positions of oil injection ports (O4)，A is set for No. 1 to No. 3 oil injection ports, B is set for No. 4 to No. 6 oil injection ports, and C and D are reserved ports.5. Set all the oil injection ports to work at the same time. Press SET/RUN and then press the circulation setting. Wait until A, B, C, and D lights are all on, and then set the number of seconds needed for adjustment.
SSII-30A Fuel injection machineSSII-30A Fuel injection machinehttp://www.shengsong.com.tw/en/product_1298297.html1. The oil container comes in one-piece molded die cast aluminum alloy enhance the structural design.It is thus much stronger and more durable than models of previous generation.2. Incorporated with a new air filter where its filter cup is hot acid brine treated,it is able to increase the filtering effect by 30% than conwen-tional filters. This helps protect the equipment from being invaded by water,waste oil and contaminants,and extend the service life of automatic water draniner.3. The new generation of oil injector features a stronger one-piece casting structure and modu-lar assembly design to prevent the parts form loosening in long-term operation.Other advan-tages are longer service life,greater durability,and a sugnificant increasw in oil discharge stabil-ity.4. The one-piece molded modular structural design is lightweight and sealed eith special O-rings to enhance easy maintenance and smooth applica-tion.5. It can be custom made to design with 16~24 lubrication spray nozzles to meet customer demand for high-quality services.6. It can be coordinated with a newly developed pressure switch (optional) to detect if the compressed air supply is adeqate. This helps to enhance smoother appication.7. All connectors of this equipment are well protected. They are anodized and nickel plated to prevent the oil lubricator from being damaged by waste oil and water.8. Backed by a two-year warranty,the service life of this equipment is twice as long as similar products sold on the market.We are too proud to offer such highest quality service.9. The new generation of streamlined exterior design is complied with modern machinery structures. We also offer a wide choice of customized colors for customers.1298297
51
1. The oil container comes in one-piece molded die cast aluminum alloy enhance the structural design.It is thus much stronger and more durable than models of previous generation.2. Incorporated with a new air filter where its filter cup is hot acid brine treated,it is able to increase the filtering effect by 30% than conwen-tional filters. This helps protect the equipment from being invaded by water,waste oil and contaminants,and extend the service life of automatic water draniner.3. The new generation of oil injector features a stronger one-piece casting structure and modu-lar assembly design to prevent the parts form loosening in long-term operation.Other advan-tages are longer service life,greater durability,and a sugnificant increasw in oil discharge stabil-ity.4. The one-piece molded modular structural design is lightweight and sealed eith special O-rings to enhance easy maintenance and smooth applica-tion.5. It can be custom made to design with 16~24 lubrication spray nozzles to meet customer demand for high-quality services.6. It can be coordinated with a newly developed pressure switch (optional) to detect if the compressed air supply is adeqate. This helps to enhance smoother appication.7. All connectors of this equipment are well protected. They are anodized and nickel plated to prevent the oil lubricator from being damaged by waste oil and water.8. Backed by a two-year warranty,the service life of this equipment is twice as long as similar products sold on the market.We are too proud to offer such highest quality service.9. The new generation of streamlined exterior design is complied with modern machinery structures. We also offer a wide choice of customized colors for customers.
